Units of the backup camera :
If you’ve bought one or are considering a car cameras manufacturer purchasing one, make sure you read through all the documentation. That total supplies the unit, and get help from a professional install tech if you are unfamiliar with how to do a job like this yourself. So here’s a look at everything that comes in the box. First is the unit itself, and overall you can see that this is a seven-inch unit, and it’s made to fit right inside your dash. Some units are available with larger screens, but the screens stick out and away from the dash. Now you wanted the smaller unit for a cleaner installation, but if you want the bigger screen, you can opt for it on this particular unit.
Car cameras manufacture some control buttons down along the bottom edge and some inputs along the side, a USB, an sd card, and an external Microphone. If you spin this around and they take a quick look at the side, you can see it’s pretty thin compared to the factory unit and on the back are all the connections for inputs and outputs. When you get to the installation part of all kinds of documentation that comes with this kit, read through it. Before you get started with any installation or operation of this unit and now along the back row here, they first have a plastic bezel that goes around the face of the unit once it’s Installed.
Some metal brackets to help get it installed a wi-fi antenna. Next, they have the supplied wiring harness. This plug goes into the back of the unit down here, and then the free end will connect up to a wiring harness kit you bought for your vehicle. They’ll look at it in a minute over here; they have a microphone so you can use voice command with this unit next; they have a backup camera that you’ll also install in your vehicle.
Kit of the backup camera :
The wiring harness is for the backup car cameras manufacturer, so because the photo is an aftermarket radio, you will also need a wiring and installation kit to get this thing to fit in your suburban. If you did a little digging around on the internet, you found a bunch of different options that may or may not work with your suburban. Suppose you decided to go with the Crutchfield installation kit now. The wiring harness you got is from pac and the model number is here while you were on the Crutchfield site if you decided to order the metra installation bracket and bezel kit that you ordered.
But because every vehicle is different, if you’re considering this project, make sure you do the research and get the installation kit. That’s right for your vehicle; here’s a quick look at everything that comes with the pack wiring harness kit. The control box is the heart of the system; all these various harnesses plug into this, and this helps control things. The steering wheel control OnStar and works with your bose amplifier.
The kit also includes a separate chime module so that you have that available after you’ve installed the photo; then, there are a few different wiring harnesses to work with; this one should allow you to use the drop-down screen that’s in the back seats. This, of course, is the main wiring harness, and they’ll be taking a look at that a little bit.
